Description
The BARTLY SP80 is a wooden stake pointing machine, also known as a stake sharpener or stake pointer, capable of processing diameters up to 80 mm. Part of the BARTLY SP - Stake Pointer range, it has a 4 kW main motor and a customisable taper length. It is intended for sawmills and woodworking businesses looking to start or complement stake production, combining straightforward operation and simplified maintenance.
Main features
Stakes up to Ø80 mm
The SP80 processes wooden stakes up to 80 mm in diameter. It is an alternative for applications requiring diameters beyond the 50 mm capacity of the SP50.
Customisable taper length
Specify the taper length according to the required product. The configuration is assessed together with the initial stake diameter and the final tip diameter.
4 kW main motor
Equipped with a 4 kW main motor and a 380 V, 50 Hz three-phase power supply. The electrical conditions at the installation must be considered when preparing the supply of the machine.
Straightforward operation
The SP80 was designed for straightforward operation and simplified maintenance, allowing you to add pointing to wooden stake preparation processes.
Geometry specified for the stake
The standard configuration corresponds to an Ø80 mm stake, with a 150 mm taper and an Ø20 mm tip. Other dimensions are assessed with Irmach according to the required product.
Complement your woodworking process
Integrate pointing into your activities and prepare stakes to meet your customers’ requirements. A solution to diversify your range and add value to processed timber.
Specify the taper for your stakes
Compare the standard configuration with the dimensions and taper geometry of the product you intend to manufacture.
Standard configuration
Stake Ø80 mm
In the standard configuration, the SP80 processes a 80 mm diameter stake, producing a taper 150 mm long and leaving a final tip diameter of 20 mm.
Customisable length
Taper to suit the product
The 150 mm dimension is the taper length in the standard configuration. For other dimensions, send the stake diameter, taper length and required final diameter. Irmach assesses the feasibility of the configuration before ordering.
Technical specifications and configuration
Check the working capacity, motor specifications and standard configuration dimensions.
View BARTLY SP80 technical specifications
The 150 mm taper length refers to the standard configuration and is not a stated maximum limit for the machine. For other dimensions, confirm the feasibility of the combination of initial diameter, taper length and final diameter with Irmach before ordering.
Frequently asked questions
What stake diameter can the SP80 process?
The BARTLY SP80 processes wooden stakes up to 80 mm in diameter. Suitability for a particular diameter must be assessed together with the required taper geometry.
Is the taper length customisable?
Yes. The taper length can be specified following assessment of the application. In the standard configuration, the taper is 150 mm long.
What is the standard BARTLY SP80 configuration?
The standard configuration corresponds to an 80 mm diameter stake, with a 150 mm taper length and a final tip diameter of 20 mm.
What is the difference between the SP50 and SP80?
The SP50 processes diameters from 20 to 50 mm, allows taper lengths up to 100 mm and has a 1.5 kW motor. The SP80 accommodates stakes up to 80 mm in diameter, has a 4 kW motor and offers a customisable taper length.
Are stake pointing machines and stake sharpeners the same equipment?
In this application, the terms stake pointing machine, stake sharpener and stake pointer refer to shaping the end of a wooden stake to form a taper.
What power supply is required?
The SP80 requires a 380 V, 50 Hz three-phase power supply and has a 4 kW main motor.
Is there a machine for stakes above 80 mm?
Yes. The range includes the BARTLY SP120, a special-build automatic machine for stake diameters from 40 to 120 mm. Its configuration is assessed according to the product and production requirements.
Where can I buy the BARTLY SP80?
You can request a quotation from Irmach for the BARTLY SP80. Specify the stake diameter, taper length, required final diameter and planned workload so that the appropriate configuration can be assessed.